 |
 |
 |
 |
Options#P111DO Chrome Pillar Post
SES Trims Stainless Steel Chrome Door Pillar Posts
If you are searching to get rid of that dull, unoriginal factory trim around the doors of your vehicle, then look no further. SES Trims stainless steel chrome door pillar posts will take your car from common to eye-catching in a matter of minutes. With such a wide array of cars and trucks out on the market, accessorizing has never been more important. SES Trims has everything you need to customize your ride so that it will stand out above all others.
Triple plated chrome lusciously envelops T304 stainless steel for a gleaming mirrored shine. At SES Trims they go the extra step to chrome not just the visible faces, but the entire piece. This provides maximum durability of the product, and it will protect it against any possible corrosion. Also, they use engineered patterns to form the accessories so that a precise fit is made to your specific make and model. Showing off their impeccable craftsmanship, SES Trims has each door pillar post beveled around the edges, which allows a complete and seamless look. You can can be guaranteed that over a long period of time the trim will still fit like the day you put it on, and it won't discolor.
There is no need for cutting, drilling, or removing your old door pillar posts when adding some SES personality to your vehicle. Installation is simply done by peeling the backing off of the automotive grade adhesive and carefully placing the SES Trim onto the O.E.M. door pillar post. With a little gentle pressing and a wipe of a rag to remove fingerprints, your car will go from plain to popping in no time. Manufactured in the United States, SES Trims has two locations to service and ship their products. One facility is located in Brooklyn, New York while the other is in Miami, Florida. Although made to the strictest tolerances with only high quality materials, each product does come with a lifetime warranty.

YOU'LL NEED - Clean work area, free of airborne dust
- Vehicle and trim temperature above 65°F (avoid temperatures beiow 65°F)
- 3M Adhesive Cleaner or equivalent
- Soft clean cloths
- Utility knife
- Masking tape (optional)
PRE-INSTALLATION - DO NOT REMOVE RED TAPE LINER OR THE PROTECTVE COVERING until instructed to do so.
- TEST FIT EVERY PIECE. Check that the shape and roll of each piece properly conforms to the contour of the vehicle. Note the proper placement and alignment for your kit.
- CLEAN RECEIVING SURFACE JUST PRIOR TO INSTALLATION. Use 3M Adhesive Cleaner (or equivalent) to clean the area thoroughly. Receiving surfaces must be clean and dry before proceeding.
INSTALLATION - REMOVE THE ENTIRE RED LINER just before installing. Protect exposed tape from contaminants.
- Place piece on factory tail light and make sure everything look aligned and straight.
- ONCE YOU GET THE PLACEMENT RIGHT press down on piece to tack it in place.
- APPLY PRESSURE OVER ENTIRE SURFACE INCLUDING EDGES with a soft clean cloth to ensure that the tape completely adheres to the vehicle. Check your edges and re-apply pressure where necessary.
- LASTLY, REMOVE WHITE PROTECTIVE COVERING. You may use any non-abrasive cleaner to keep your trim shining bright.
SES Trims is a manufacturer of high quality stainless steel auto accessories including billet grills, pillar posts, door handles, mirror covers and more. Our classic design billet grille inserts offer the most superior chrome quality with an easy quick install over your existing grill while offering the finest fit and finish available in the market.
After being in the business for over 15 years, we know everything there is to know about billet grilles and we think you should too. That's why we have developed this article so you can learn everything there is to know about the billet grill starting from the definition of a grille all the way to the common materials used to manufacture them and the types of installations involved.
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- SES Stainless Steel Pillar Post Trims are custom crafted for your specific make.
- The Stainless Steel provides the eye-catching gleam,
- patterns ensure a clean fit and finish. High-quality automotive-grade adhesive!
- Cut from sheets of T304 stainless steel
- Your SES Stainless Steel Pillar Post Trim is backed by a Lifetime Warranty
- Simply installation :
- 10 Minutes do it yourself,
- Uses 3M automotive grade tape to Install,
- Clean the vehicle�s surface,
- Remove the adhesive�s backing and stick in place,
- Ready to peel and stick,
- Attaches over existing factory Pillars
- Beveled edges and precision patterns,
- Long lasting material!
|
|
 |
 |
 |
 |
|
 |


|