 |
 |
 |
 |
BilletAnything Solid Billet Race Pedals
BilletAnything's Billet Pedal manual cover kits include gas, brake, and foot rest pedals available in two distinct colors—black anodized, or satin silver. BilletAnything's makes these pedals out of heavy-gauge aircraft thick aluminum, and the finished design gives your vehicle a classic and finished race inspired look.
- Features a grid textured finish
- Kit features a race-inspired, CNC-milled traction finish
- Aggressive sharp edges machined into each pedal to keep foot from sliding
- Custom race inspired heel toe gas pedal
- Easy step by step installation securely mounts product to OE pedals with included hardware
- No loose clamp-on mounts
- Minor drilling required
- Custom fit
- Backed by lifetime warranty
Buy it once - buy it right. We stand behind our products!

Detailed Instructions
When installing our pedals you do have to drill holes into your factory pedals. Once installed, our pedals are a part of your car with no chance of coming off. All hardware is stainless steel and provided. The instructions below are applicable to most cars. However, some cars will have a slightly different installation procedure. These differences should be noted on the pedal page for the vehicle. The typical installation time is 30 minutes to 1 hour. Your results may vary. If you ever decide to remove your pedals, the factory rubber covers can be put back on the brake and clutch to cover the holes. The holes you drill into the gas pedal and footrest are really small enough to not be noticed, unless looked at closely.
Tools required:
- Drill: 3/16" Drill Bit - Phillips Head Screwdriver: 1/16" Drill Bit - 9mm Wrench Center Punch
Warning: Make sure you wear safety glasses during this installation.
Step by Step Instructions:
1. Remove any factory rubber or factory metal/plastic sport covers or any other aftermarket pedal covers from the brake, clutch and/or gas pedal when and if applicable. Most factory rubber covers will pull right off. Some factory metal/plastic sport pedal covers have rivets which must be drilled out (do not drill thru pedal yet) with a 1/8” drill bit to remove the cover.
2. Put masking tape on the brake and clutch and mark the mounting holes using the aluminum pedals as a template. Make note of where the rod is welded to the back side of the pedal pad in relationship to the holes in the billet cover. Align the billet covers in such a way that after you drill through the pedals there will be room to install and hold the nuts on the back side of the pedals.
3. Use your center punch and hammer and punch your mounting holes marked on the brake and clutch. Use the 1/16” drill bit to drill pilot holes, followed by the 3/16” bit. Mount the brake and clutch using machine screws and lock nuts.
4. Put masking tape and the gas pedal and footrest. Using the aluminum cover, mark your mounting holes. Remove aluminum cover. Drill pilot holes with 1/16” drill bit. Tap the holes with the pointy self tapping screws. Remove screws, put pedal into position, and attach using self tapping screws.
- Check that all pedals are securely attached using all mounting locations. - Make sure all pedals have adequate clearance between adjacent pedals and floor covering. - After driving, recheck all pedals to make sure they are secure.
NOTE: the gas pedal is typically smooth so that your foot will slide across it.
When it comes to modifying the looks of today's wide automotive array the need to accessorize has never been greater. Noticeably lacking is front-end personality. Everywhere chromeless, featureless, dead space greets the viewer.
Even worse, the nose end of most cars and trucks is framed by fragile plasticized chrome meant to be passed off by cost-conscious manufacturers as a cheap substitute for what was the genuine chrome-plated gleam-and-sparkle of the cars of yesteryear.
Nowadays, real steel and real chrome are hard to find. Numerous suppliers have hurried to fill the vacuum with grill inserts, billet grill replacements and grill kits. But, where's the steel? Where's the real chrome?
Here at BilletAnything we provide you with only the highest quality Grille.
Also, here at BilletAnything we promise to give you the best quality grilles at the best price in the market we will not be undersold on any grille that we sell. This is why accessory grille trim by BilletAnything excels over our competitors.
|
|
 |
 |
 |
 |
|
 |


|